U-Boot SPL 2016.05-inmusic-20170406 (Jul 21 2017 - 18:42:27) Trying to boot from MMC1 U-Boot 2016.05-inmusic-20170406 (Jul 21 2017 - 18:42:27 +0000), Build: jenkins-SME0-trunk-linux-671 Model: InMusic MPC ACV8 DRAM: 2 GiB MMC: dwmmc@ff0f0000: 0 In: gpio-keys Out: serial Err: serial Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:6... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 68 bytes read in 22 ms (2.9 KiB/s) 1: buildroot Retrieving file: /boot/zImage 4613016 bytes read in 219 ms (20.1 MiB/s) Retrieving file: /boot/rk3288-az01-mpc-acv8.dtb 42714 bytes read in 21 ms (1.9 MiB/s) Kernel image @ 0x2000000 [ 0x000000 - 0x466398 ] ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Device Tree to 1fff2000, end 1ffff6d9 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x500 Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.80-inmusic-2017-11-17-rt92 (builds@fc1eccb8a7e0) (gcc version 5.3.0 (Buildroot 2016.02) ) #1 SMP PREEMPT RT Wed Dec 6 12:07:17 UTC 2017 CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: InMusic MPC ACV8 Reserved memory: initialized node framebuffer, compatible id rockchip,framebuffer-memory Memory policy: Data cache writealloc PERCPU: Embedded 12 pages/cpu @eef8c000 s20480 r8192 d20480 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752 Kernel command line: root=PARTUUID=24d1deac-3434-1a4e-98d1-68ee2945a5f1 rootwait ro console=ttyS2,115200 rfkill.default_state=0 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2056872K/2097152K available (6591K kernel code, 348K rwdata, 2152K rodata, 320K init, 369K bss, 27992K reserved, 12288K cma-reserved, 1298432K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0891f9c (8744 kB) .init : 0xc0892000 - 0xc08e2000 ( 320 kB) .data : 0xc08e2000 - 0xc0939358 ( 349 kB) .bss : 0xc093c000 - 0xc09987c4 ( 370 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptible hierarchical RCU implementation. RCU kthread priority: 1. NR_IRQS:16 nr_irqs:16 16 L2C: failed to init: -19 rockchip: reset MMC AHB arbitor Architected cp15 timer(s) running at 24.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Switching to timer-based delay loop, resolution 41ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 Setting up static identity map for 0x82c0 - 0x8318 CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 Brought up 4 CPUs SMP: Total of 4 processors activated (192.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu No ATAGs? hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. vcc_sys: Failed to create debugfs directory iommu: Adding device ff930000.vop to group 0 iommu: Adding device ff940000.vop to group 1 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.21 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 5, 229376 bytes) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 3, 32768 bytes) UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.23) bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered io scheduler deadline registered (default) dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A console [ttyS2] disabled ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 38, base_baud = 1500000) is a 16550A console [ttyS2] enabled rk3x-i2c ff140000.i2c: using default SCL frequency: 100000 rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at f08ba000 rk3x-i2c ff150000.i2c: using default SCL frequency: 100000 rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at f08bc000 rk3x-i2c ff160000.i2c: using default SCL frequency: 100000 rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at f08be000 rk3x-i2c ff170000.i2c: using default SCL frequency: 100000 rk3x-i2c ff170000.i2c: Initialized RK3xxx I2C bus at f08c0000 rk3x-i2c ff650000.i2c: using default SCL frequency: 100000 fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at f08c2000 [drm] Initialized drm 1.1.0 20060810 rockchip_framebuffer_rmem_device_init: initializing with page address (null) rockchip-drm display-subsystem: assigned reserved memory node framebuffer rockchip-vop ff940000.vop: enabled by bootloader rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops) rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops) vcc_mipi: supplied by vcc_sys rockchip-drm display-subsystem: bound ff960000.mipi (ops dw_mipi_dsi_ops) [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. rockchip-drm display-subsystem: fb0: frame buffer device vdd_gpu: supplied by vcc_sys mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1 mali ffa30000.gpu: could not find power_model node mali ffa30000.gpu: Probed as mali0 brd: module loaded loop: module loaded ff580000.usb supply vusb_d not found, using dummy regulator ff580000.usb supply vusb_a not found, using dummy regulator dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM dwc2 ff580000.usb: DWC OTG Controller dwc2 ff580000.usb: new USB bus registered, assigned bus number 1 dwc2 ff580000.usb: irq 41, io mem 0x00000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DWC OTG Controller usb usb1: Manufacturer: Linux 4.4.80-inmusic-2017-11-17-rt92 dwc2_hsotg usb usb1: SerialNumber: ff580000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-platform: EHCI generic platform driver ehci-platform ff500000.usb: EHCI Host Controller ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2 ehci-platform ff500000.usb: irq 40, io mem 0xff500000 ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 4.4.80-inmusic-2017-11-17-rt92 ehci_hcd usb usb2: SerialNumber: ff500000.usb hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usb5537 1-002d: switched to HUB mode usb5537 1-002d: usb5537_probe: probed in hub mode usb5537 1-002d: reg 0x3c00 = 0x03 usb5537 1-002d: reg 0x3c04 = 0x03 usb5537 1-002d: reg 0x3c08 = 0x03 usb5537 1-002d: reg 0x3c0c = 0x03 usb5537 1-002d: reg 0x3c10 = 0x04 usb5537 1-002d: reg 0x3c14 = 0x03 usb5537 1-002d: reg 0x3c18 = 0x03 usb5537 1-002d: reg 0x3c1c = 0x00 usb5537 1-002d: reg 0x3c20 = 0x01 usb5537 1-002d: reg 0x3c24 = 0x01 usb5537 1-002d: reg 0x3c28 = 0x01 usb5537 1-002d: reg 0x3c2c = 0x01 usb5537 1-002d: reg 0x3c30 = 0x01 usb5537 1-002d: reg 0x3c34 = 0x01 usb5537 1-002d: reg 0x3c38 = 0x01 mousedev: PS/2 mouse device common for all mice ili2116 4-0041: protocol version 02.03 usb 2-1: new high-speed USB device number 2 using ehci-platform input: ILI2116 Touchscreen as /devices/platform/ff160000.i2c/i2c-4/4-0041/input/input0 rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 lirc_dev: IR Remote Control driver registered, major 247 IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR LIRC bridge handler initialized IR XMP protocol handler initialized power_supply sbs-3-000b: Not all required supplies found, defer probe sbs-battery 3-000b: sbs_probe: Failed to register power supply VCC_IO: supplied by vcc_sys vcc_sys: supplied by VCC_IO VCCIO_PMU: supplied by vcc_sys VCC_20: supplied by vcc_sys VCC_18: supplied by VCC_20 VCCIO_SD: supplied by VCC_IO Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered usb 2-1: New USB device found, idVendor=09e8, idProduct=503b usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: MPC Live Hub usb 2-1: Manufacturer: Akai Professional hub 2-1:1.0: USB hub found hub 2-1:1.0: 7 ports detected hci_bcm bcm@0: BCM irq: -22 hci_bcm bcm@0: bcm@0 device registered. Bluetooth: HCI UART protocol BCM registered usb 2-1.5: new high-speed USB device number 3 using ehci-platform vdd_cpu: supplied by vcc_sys Synopsys Designware Multimedia Card Interface Driver dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode. dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller. dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo vcc_sd: supplied by VCC_IO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=0 dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0 rockchip-iodomain io-domains: Setting to 3300000 done rockchip-iodomain io-domains: Setting to 3300000 done dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 usb 2-1.5: New USB device found, idVendor=09e8, idProduct=203b usb 2-1.5: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 2-1.5: Product: MPC Live Audio usb 2-1.5: Manufacturer: Akai Professional dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 usb 2-1.6: new full-speed USB device number 4 using ehci-platform dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode. dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller. dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1 dwmmc_rockchip ff0d0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0 dwmmc_rockchip ff0d0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1 usb 2-1.6: language id specifier not provided by device, defaulting to English dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode. dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller. dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo dwmmc_rockchip ff0f0000.dwmmc: allocated mmc-pwrseq dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver r8188eu usbcore: registered new interface driver rtl8723au usbcore: registered new interface driver snd-usb-audio ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Registering SWP/SWPB emulation handler power_supply sbs-3-000b: sbs-3-000b: Found supply : az01-ac-power thermal thermal_zone3: failed to read out thermal zone (-19) sbs-battery 3-000b: bq40z50: battery gas gauge device registered input: gpio-keys as /devices/platform/gpio-keys/input/input1 rtc-hym8563 0-0051: setting system clock to 2018-01-28 16:29:40 UTC (1517156980) dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1 rockchip-iodomain io-domains: Setting to 3300000 done ALSA device list: #0: Akai Professional MPC Live Audio at usb-ff500000.usb-1.5, high speed rockchip-iodomain io-domains: Setting to 1800000 done dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=25000000 power_mode=2 mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) mmc0: new ultra high speed SDR12 SDHC card at address 59b4 mmcblk0: mmc0:59b4 USD00 14.8 GiB mmcblk0: error -84 sending status command, retrying mmcblk0: error -84 sending status command, retrying mmcblk0: error -84 sending status command, aborting dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=0 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=1 ttyS2 - failed to request DMA usb 2-1.6: New USB device found, idVendor=09e8, idProduct=003b usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.6: Product: MPC Live Controller usb 2-1.6: Manufacturer: Akai Pro dwmmc_rockchip ff0c0000.dwmmc: dw_mci_switch_voltage: signal_voltage=0 rockchip-iodomain io-domains: Setting to 3300000 done rockchip-iodomain io-domains: Setting to 3300000 done dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=0 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1 rockchip-iodomain io-domains: Setting to 3300000 done rockchip-iodomain io-domains: Setting to 1800000 done dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=400000 power_mode=2 dwmmc_rockchip ff0c0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=25000000 power_mode=2 mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) mmc0: tried to reset card mmcblk0: p1 Waiting for root device PARTUUID=24d1deac-3434-1a4e-98d1-68ee2945a5f1... dwmmc_rockchip ff0d0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0d0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0d0000.dwmmc: dw_mci_command_complete: got RTO mmc1: queuing unknown CIS tuple 0x80 (2 bytes) mmc1: queuing unknown CIS tuple 0x80 (3 bytes) mmc1: queuing unknown CIS tuple 0x80 (3 bytes) mmc1: queuing unknown CIS tuple 0x80 (7 bytes) dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=400000 power_mode=2 dwmmc_rockchip ff0d0000.dwmmc: dw_mci_set_ios: bus_width=2 timing=3 clock=25000000 power_mode=2 mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) mmc1: queuing unknown CIS tuple 0x91 (3 bytes) mmc1: new ultra high speed SDR12 SDIO card at address 0001 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_command_complete: got RTO dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=0 clock=400000 power_mode=2 mmc2: MAN_BKOPS_EN bit is not set dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=1 clock=400000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=0 timing=1 clock=52000000 power_mode=2 mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=3 timing=1 clock=52000000 power_mode=2 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_switch_voltage: signal_voltage=1 dwmmc_rockchip ff0f0000.dwmmc: dw_mci_set_ios: bus_width=3 timing=8 clock=52000000 power_mode=2 mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) mmc2: new DDR MMC card at address 0001 mmcblk1: mmc2:0001 H8G1e 7.28 GiB mmcblk1boot0: mmc2:0001 H8G1e partition 1 4.00 MiB mmcblk1boot1: mmc2:0001 H8G1e partition 2 4.00 MiB mmcblk1: p1 p2 p3 p4 p5 p6 p7 EXT4-fs (mmcblk1p6): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 179:38. devtmpfs: mounted Freeing unused kernel memory: 320K (c0892000 - c08e2000) random: systemd: uninitialized urandom read (16 bytes read, 47 bits of entropy available) systemd[1]: systemd 228 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) systemd[1]: Detected architecture arm. Welcome to Buildroot 2016.02! systemd[1]: Set hostname to . random: systemd: uninitialized urandom read (16 bytes read, 47 bits of entropy available) systemd[1]: Initializing machine ID from random generator. systemd[1]: Installed transient /etc/machine-id file. random: systemd: uninitialized urandom read (16 bytes read, 48 bits of entropy available) random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 50 bits of entropy available) systemd-fstab-generator[135]: Ignoring "noauto" for root device random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 50 bits of entropy available) random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 50 bits of entropy available) random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available) random: systemd: uninitialized urandom read (16 bytes read, 52 bits of entropy available) random: systemd: uninitialized urandom read (16 bytes read, 53 bits of entropy available) random: systemd: uninitialized urandom read (16 bytes read, 53 bits of entropy available) systemd[1]: serial-getty@console.service: Cannot add dependency job, ignoring: Unit serial-getty@console.service is masked. systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Mounting Mount /media... Mounting Mount /media... systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... systemd[1]: Starting Journal Service... Starting Journal Service... systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the cusystemd[1]: Started Forward Password Requests to Wall Directory Watch. rrent kernel... [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Reached target Slices. [ OK ] Reached target Slices. systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... systemd[1]: Mounting Configuration File System... Mounting Configuration File System... systemd[1]: Reached target Swap. [ OK ] Reached target Swap. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ OK ] Reached target Paths. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Debug File System... [ OK ] Mounted Mount /media. [ OK ] Mounted Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Debug File System. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Apply Kernel Variables. Starting Remount Root and Kernel File Systems... [ OK ] Started Remount Root and Kernel File Systems. Starting Create Static Device Nodes in /dev... Starting udev Coldplug all Devices... [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... [ OK ] Mounted /tmp. [ OK ] Started udev Kernel Device Manager. [ OK ] Created slice system-btattach.slice. [ OK ] Found device /dev/ttyS2. [ OK ] Reached target Sound Card. [ OK ] Created slice system-systemd\x2dbacklight.slice. [ OK ] Found device /dev/disk/by-partuuid/...49d-ad59-0849-833a-9bf00af5b60e. Starting Create /media/az01-internal filesystem if necessary... [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create /media/az01-internal filesystem if necessary. Mounting /media/az01-internal-sd... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Mounting Mount /media/az01-internal... [ OK ] Mounted Mount /media/az01-internal. Starting Setup directories for overlayfs mounts... [ OK ] Started Setup directories for overlayfs mounts. Mounting Writable /etc via OverlayFS... Mounting Writable /var via OverlayFS... [ OK ] Mounted Writable /etc via OverlayFS. [ OK ] Mounted Writable /var via OverlayFS. Starting Load/Save Random Seed... Starting Load/Save RF Kill Switch Status... Starting Load/Save Screen Backlight...s of backlight:mipi-backlight... Starting Flush Journal to Persistent Storage... Starting Fix transient machine-id after mounting /etc... [ OK ] Mounted /media/az01-internal-sd. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started Load/Save Random Seed. [ OK ] Started Load/Save Screen Backlight ...ess of backlight:mipi-backlight. [ OK ] Started Fix transient machine-id after mounting /etc. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems. Starting Commit a transient machine-id on disk... Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Commit a transient machine-id on disk. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Bluetooth HCI attach on ttyS0. [ OK ] Started AZ01 JMicron USB-SATA bridge configuration fixer. Starting Hostname setup for MPC... [ OK ] Started AZ01 power button emergency shutdown service. Starting Network Connectivity... [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. [ OK ] Started D-Bus System Message Bus. Starting Bluetooth service... Starting Login Service... [ OK ] Started Bluetooth service. Starting Hostname Service... [ OK ] Started Network Connectivity. [ OK ] Started Login Service. [ OK ] Started Hostname Service. [ OK ] Started Hostname setup for MPC. [ OK ] Reached target Network (Pre). Starting Connection service... [ OK ] Started Connection service. [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started AZ01 script runner service. [ OK ] Started InMusic MPC Application. [ OK ] Started Network Name Resolution. Starting WPA supplicant... [ OK ] Reached target Bluetooth. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [ OK ] Started WPA supplicant. Welcome to Buildroot mpc-live login: